Tic Tac Toe anyone?

Standard
tic tac toe!

tic tac toe!

My sister and I love playing tic tac toe. It’s a fun game when you’re sitting at the doctors office, waiting for your violin lesson or on a camping trip.

My mom and I decided to make this little portable tic tac toe set. This would be a great birthday gift for a friend or just something to make for yourself.

It’s really easy! Here’s how you do it.

The supplies for this project are two pieces of fabric 10 inches by 11 inches]

ric rac or ribbon (although you could just use a zig zag stitch in a coordinating color  to make the lines if you don’t have any ric rac)

10 buttons- 5 of one color and 5 of a different color (you could also use little colored tiles, painted rocks, little pencil erasers, plastic checkers, really anything but they need to be different colors.

supplies

supplies

Start by cutting two pieces of fabric 10 inches by 11. Make the 10 inch side the width and the 11 inch side the height. (you need that 1 extra inch to make the casing on the top to close up the bag)

IMG_9535

Iron your fabric and then lay out the ric rac in a tic tac toe position on one piece of the fabric.

laying out the design

laying out the design

pin on the ric rac and sew on the bottom two pieces carefully.

IMG_9538

Now pin and stitch on the other two pieces of ric rac.

IMG_9540

trim off the extra ric rac and then lay the right sides together of your second piece of fabric.

trim off excess

trim off excess

right sides together
right sides together

Now measure 1.5 inches from the top and draw a line with a pencil. This will be the casing so when you sew the bag together you want to start below this line.

1.5 inches down from the top

1.5 inches down from the top

Stitch around the three sides. We used a 1/4 seam allowance. Don’t’ forget to backstitch at the beginning and end. It will keep your bag from tearing open.

IMG_9548 IMG_9547

Once you have the bag stitched together it’s time to make the casing, or tube for the drawstring. Using your iron fold the top over just a little bit (about a 1/4 inch) and press, then fold it over and press again but this time fold it over about an inch. You need your casing to be big enough to fit your cord (or in our case we used extra ric rac as our drawstring)

first fold over

first fold over

second fold over

second fold over

Stitch very close to the edge to leave plenty of room for your cord.

stitching on the casing.

stitching on the casing.

Time to feed in the drawstring. This can be tricky but is MUCH easier if you use a little safety pin to help you feed the ric rac through the casing.

IMG_9559 IMG_9560

Now tie off the ric rac so it doesn’t slip back into the casing and you’re ready to play!

IMG_9564 IMG_9563

IMG_9565 IMG_9579 IMG_9577

IMG_9562

 

Ohh and for an easier version of this craft we found this fun tutorial for a hand sewn felt version. Check it out here!

Advertisements

Valentines Cards- who do you love?

Standard

IMG_9299

My cousin Demi is visiting from Florida and she loves doing crafts as much as I do. We decided since Valentines Day is on Friday that we’d make cards for our family.

We used little fabric scraps, plain white cards, and pellon fusible webbing to make fabric stickers for our cards. It was super easy and REALLY fun.

The first step is to iron some Pellon onto your scrap of fabric.

IMG_9290

Then you want to draw a design or you could just free cut a design in your fabric.

IMG_9287          IMG_9292

Place it on your card and iron it down.

IMG_9294

That’s it!!

You could stitch on top of the design with your sewing machine but we just left them the way they were. We did add some stickers to a few of the cards and that looked good too.

We made a ton of these for our grandparents, each other, and all our friends.

IMG_9284

Superhero Capes!

Standard

photo 1 photo 3

My sister loves to pretend she’s a superhero and so do I. She made up a name for herself called “Super Turtle Marin” because she loves turtles. I call myself “Wonder Woman” or “Wonder Tenney”. We decided it would be fun to make our own capes and it was SUPER easy. My mom helped us to decorate them a little using the same appliqué technique we learned in the Hawaiian Inspired Applique pillow tutorial we posted a while back.

For this project you need

1/2 a yard of your favorite fabric.

Scraps of coordinating fabric if you choose to decorate it.

Pellon Fusible Webbing – lightweight (if you’re decorating your cape)

Begin by cutting your cape fabric.

For a smaller cape like the one we made for my sister you want to cut the fabric 11 inches across at the neck, 18 inches at the bottom and 18 inches long. We measured 3.5 inches in from the edge of our rectangle of fabric and lined up our ruler to the bottom. Once you cut it you have a really clean diagonal line. Do it on both sides to create the triangle shape. For a longer cape we suggest 24 inches long but really you can make this fit your body so any length is great.

photo 4

measuring in 3.5 inches

photo 5

cape after cutting

Now we have to hem the edges. For this part you need to use an iron. Get a grown-ups help. On the sides and bottom you need to fold over the fabric 1/4 inch and iron it down. Then do the same thing and iron it again. You won’t see any raw edges on your project this way. You can use this technique (called hemming) on tons of projects. On the top of the cape you’re going to basically do the same thing by folding over 1/4 inch and ironing down, but the second time you fold over you should fold it down 1 inch so that you make what’s called a casing. It’s just a long tube that you can insert your tie or neck strap into later.

regular hemmed edge- folded over twice.

regular hemmed edge- folded over twice.

casing edge

casing edge- folded over twice

Once you have everything folded over and ironed you need to stitch all around the cape.

preparing to stitch the casing edge.

preparing to stitch the casing edge.

Once you have your cape stitched you need to make a neck strap so you can wear it. You could use just a bit of ribbon or a shoelace but we decided to make our own  so we could show you how to make your own binding tape.

We cut a piece of fabric 2 inches wide and 25 inches long. We used the extra bit of our fabric to make this so it just happened to be 25 inches, if yours is a bit shorter or longer that’s no big deal.

binding tape

binding tape

Now using your iron fold one side half way up and iron it down, then fold the other side to match the first and hem down.

folded halfway up

folded halfway up

Once you have both sides folded in then you fold both sides together. It hides all the raw edges inside the binding tape. All you need to do it to press it down and stitch it down the edge.

stitching binding tape

stitching binding tape

Once that’s done you need to feed it through your casing on the cape and try it on!

photo 3photo 2

We used the techniques of using appliqué to place pellon fusible web on some scrap fabric and then ironed it on to my sisters cape. I told you she’s obsessed with turtles. My mom made a turtle to put on her cape.

photo 5

my sister “super turtle”photo 4       photome "flying" with my capeme “flying” with my cape

No Sew Rag Dolls! Perfect easy craft for a snowy day!

Standard

So this morning my mom told me that there is a huge snowstorm that’s covering most of the middle and eastern united states. We live in Los Angeles so we never get snow except for in the mountains, but I dream of living in a snowy place someday. Mom told me that kids in states where it snows get “snow days” on days like these. You’re so LUCKY!

We thought we might give you a little craft that you can do with just scrap fabric around the house since you may be stuck inside for a while. Make a few of these after you warm up from making your snowman or sledding!

Enjoy and stay warm!

Tenney

(mom apologizes for the sound quality. she accidentally covered up the microphone for a few seconds a couple times! oops!)

Help us spread the word!

Standard

My mom and I are having a little contest today. She doesn’t think we can get to 100 likes on our Facebook page by the end of the day but I think we can!

If you haven’t already, please stop by and like our Facebook page https://www.facebook.com/sewkidsew and please recommend it and invite your creative friends. (and friends that need a little support in the creativity department!)

We want to reach as many kids as we can!

Thanks for your support!

Tenney (and mom)

IMG_8090

Valentines Placemats- quilt as you go!

Standard

photo

So today’s post is really exciting because I want to teach you a technique called “quilt as you go.” In our example we made a placemat but you could use this technique to make a table runner or a baby blanket, really whatever you want. It’s super easy and really fun.  We also did the binding (the finishing edge around the placemat) with a fun and easy technique so with these little tips you can make TONS of stuff!

The materials you need for this project are

fabric for the back of the placemat 10.5 inches by 17.5 inches

strips of fabric for the top cut 10 inches long by various widths. (we bought 6 different fabrics for the top and bought 1/4 yard of each and were able to make 6 placemats)

batting to place in-between – 10 inches by 17 inches

Let’s get started!

First cut your back fabric 10.5 inches by 17.5 inches

IMG_9012

Then lay your batting on top with the right side (colored side) down on the table. There should be a 1 inch border all around the batting.

IMG_9013

Now you get to have some fun and be creative!

Chose a strip to start with and place it at the edge of the batting and pin all three layers together.

IMG_9014 IMG_9015

Sew the first strip on (sewing all three layers together) 1/4 inch in from the edge.

IMG_9016

Now take your second strip and lay it down right sides together on the left edge of the first strip and pin.

IMG_9017

Sew down the edge 1/4 inch (sewing through all layers) and then press open.

IMG_9018 IMG_9019

Continue the same way sewing on your strips until you get all the way across to the end of the batting.

IMG_9020 IMG_9022 IMG_9023 IMG_9024

Once you have your strips on it’s time to finish the edge.

This is a super simple way to bind your placemat. You will need a grownups help for this because you need the iron. Iron the raw edge of your back fabric up 1/4 inch and then fold it over and iron it again. (it will now be coming over the edge of the placemat)

IMG_9025 IMG_9026 IMG_9027 the picture on the left shows the first fold over-

Once you have the edges ironed you need to stitch them down. Start in the middle of one of the sides of the placemat and stitch down your binding next to the edge. When you get close to the corner stop and get ready to make the turn. You want a nice mitered edge (which means it looks like a diamond) so you take the fabric, pull it to the side into a triangle and fold it up. Then fold over the right edge and fold up the bottom edge.

IMG_9029 IMG_9030 IMG_9031 IMG_9032

now you can finish stitching down to the end and very carefully turn the corner.

Do the same thing on all four corners and you’re done!!!

IMG_9036

You can use these techniques for all kinds of things. Make something and send me a picture for our creation gallery!

Love Letters- Felt envelopes filled with love!

Standard

IMG_9043

To celebrate the beginning of February we’re going to share a few fun Valentines themed projects. This first one is a love letter. You can make these for your parents, sister, brother, classmates, bff, teachers or anyone you love. My little sister loves to play mail carrier and we made a bunch of these for her play mail set. You can fill them with a valentines card, a picture, a heart cut out of felt, candy… the options are kind of endless.

Here’s how to make them. It’s SUPER simple.

The materials for this project are a sheet of felt, extra little scraps of felt in a contrasting color for stamp and velcro sticky dots for  the closure.

Print out the pattern.

We made our pattern so that you can get 2 envelopes from one sheet (8.5X11 inch piece) of felt.

click on pattern to enlarge and print.

EPSON MFP image

Cut out the pattern.

IMG_8971

Lay it on your felt, pin it and cut it out very carefully. We used a rotary cutter to get the cleanest lines but you can totally use scissors too.

IMG_8972

Fold your envelope in thirds to get a sense of where to put the “address”. We drew on ours with a marker so that you can see but you don’t have to do that if you don’t like the way the ink looks on the felt.

IMG_8973 IMG_8974

Next cut out your stamp. You don’t have to be super precise with the stamp. Just a nice curvy square works. We cut a heart for the middle but you could cut a star or any other shape that suits the person you’re going to “send” it to.

IMG_8975 IMG_8976

Now it’s time to sew! We used a zig zag stitch to sew on the address. Make sure the envelope is NOT folded when you do this!

IMG_8978

also stitch on the stamp. Use either a straight or zig zag stitch. Whichever you like better.

IMG_8979

Now it’s time to sew it up.

Fold your envelope in thirds and line up the edges. Now open the top of the envelope and just sew down the sides.

IMG_8981 IMG_8982 IMG_8983

Get out your sticky little velcro dots and place them on the envelope to make a closure.

IMG_8984 IMG_8985 IMG_8986

ta da!!! That’s it. Simple and so cool.

Make a bunch of them! Send me a picture for our creation gallery!

IMG_9041

Happy sewing,

Tenney